Jeep, or rather D’Ellis Kincannon, started his apprenticeship in the stoneyard in 1980 after working in the Cathedral mail room for a year. He came to NYC to go to art school, but found it wasn’t for him. When the stone yard program started up it seemed a perfect fit, and it was.
He excelled as a banker mason. I think it’s fair to say that he and Jose (Tapia) were the top stone cutters. The Cathedral showcased their work for fundraising purposes. They were featured in multiple magazines and news publications.
The Banker Mason
Jeep was also one of the first few to apprentice under Chris Hannaway. He had the highest regard for Chris and was disappointed to see him return to England. He often made reference to Chris’ mastery in banker masonry and anything stone related. Jeep’s prize possession was an old mallet that Chris had given him from his early days in Liverpool.
Master Builder James Bambridge was impressed enough with D’Ellis’ work to once state that “his masonry is as perfect as if it had been poured into a mold”. It was obvious that this discipline was one that Jeep immediately embraced. He also had a gift for drafting and setting out. He was a natural at perceiving 3-dimensional intersections.
To advance Jeep’s skills even further, the Cathedral sent him to the Bath School for Architectural Trades in England. This was very rewarding for Jeep as he completely immersed himself in the trade. Aside from the school, he was taken aback at finding himself in a city that the Romans had built, in part. He was also astounded that one of the local pubs had been in operation since the “Black Death”. This place became a regular haunt for Jeep and many of the other students.
After a year, Jeep returned to NYC and continued working as a banker mason. By this time, Alan Bird had replaced Chris Hannaway and the yard was humming along. Later Jeep advanced into the setting-out shop with fellow apprentice, Cynie Linton. He had real misgivings about leaving banker masonry. I remember him grumbling despite the promotion.
The Setting-Out Shop
Jeep and Cynie worked directly with James Bambridge transferring the original architect’s drawings into full-scale tower drawings that would later be numbered and patterned into various zinc templates for the banker masons’ shop. The masons used to laugh when he would step in to help an apprentice understand the complex templates. “Uh oh, Jeep’s got that look on his face!” This is not a look you wanted to see, as it usually meant an irretrievable mistake had been made in the stone work. If you had trouble understanding the templates he and Cynie were the ones to see.
As things slowed down in the setting-out shop, a new opportunity arose; a competition for the new carving apprenticeship under the tutelage of Nick Fairplay. Jeep scored in the top five. He served his three years and was later appointed as head carver. During this period, he contributed many celebrated carvings to the tower. Jeep continued on in that position for a year until he was positioned as the head of the drafting and setting-out department.
As Chief Draftsman, Jeep also worked on the tower with Master Mason Steve Boyle, for whom he had the greatest respect. Boyle was not one to embrace the limelight and Jeep ofter commented on how he was the unsung hero who quietly puzzled together the massive stones on the tower, a truly monumental task.
Working on the Tower
Steve relayed a story about how instrumental Jeep was in the setting of the first course of stonework:
“It should be mentioned that Jeep deserves credit for the tower actually fitting on the building. Delays in scaffold erection meant that the first stones that we laid were rather hurriedly positioned. The deadline for the installation of the Jerusalem Stone rapidly approached. The setting of this historic cornerstone included a well-publicized ceremony featuring high wire aerialist, Philippe Petit delivering a silver trowel to the Bishop of New York for the official blessing. Since the scaffolding was only partially in place, it hadn’t been possible to lay out all of the building lines as planned before Bambridge had to return to the UK.
This was alarming to me at the time as it meant this task might fall to me. Sure enough, as we began to set more stone it was clear that the first stones had been set too far over to the North resulting in the new stone overhanging by about a half inch. I called Bambridge in the U.K. and he told me I would have to do the setting out. He understood my uneasiness, but told me I could always rely on Jeep for help with this and he was right. Jeep had a thorough understanding of the whole project by this time and knew exactly what to do. Great thanks to him; everything ended up where it was supposed to be”
-Master Mason Stephen Boyle
Cathedral Stoneworks
In 1989, he stepped away from drafting to join the carving team working on the West Front. Work on the Central Portal statuary had recently resumed under the direction of Simon Verity. For Jeep, the carving ended too soon. The Jewish Museum awarded a major contract to the stoneyard. It was an early 20th Century Gothic Revival building on 5th Avenue. The drafting department was about to become a very busy place.
This was the beginning of a new era. A commercial venture was underway with the goal of replenishing the depleted Cathedral coffers by taking on independent projects. It was a good effort, but the partnership with Cathedral Stoneworks ultimately marked the end of the tower project and any dream of completing the Cathedral. Jeep continued working as Chief Draftsman until he left in 1993.
He Wore Many Hats
He was one of the few who wore most of the hats available in the Cathedral stone yard. Those hats included sawyer, estimator, banker mason, setting-out, stone carver and fixer mason (on the tower). He would laugh and say that the only job he didn’t do was to run the planer. That position belonged to Nelson Otero, and to only Nelson Otero.
D’Ellis often expressed his admiration for other modest people who produced great stone work for the tower. He often referred to Yves Pierre and Angel Escobar. He once said that “The very first time Angel picked up a chisel, he knew what to do with it. And, it was a little unnerving.” These guys were natural stone cutters, but not inclined to talk in front of the T.V. cameras.
Beyond the Cathedral, he would spend the next eight years teaching, designing, cutting and carving stone on large public and private projects with Kincannon Studios in Texas until his death in 2001. I can say that throughout this period, as busy as we were, he was ready to drop everything and return to NYC if the team reunited to finish the tower. There’s no doubt about that.
■
- The author of this post, Joseph Kincannon, is the younger brother of D’Ellis “Jeep” Kincannon. Joseph is a teacher and architectural sculptor.
Tom Fedoreksays:
Wayne kemptonsays:
Tim de Christophersays:
